Wood Fibres

Meaningful results for fibre length and fibre diameter of wood fibres by image analysis

Wood fibres are mainly used for the production of medium density fibreboards (MDF). They are used as building material and insulation material in order to regulate the temperature and climate, as well as to provide noise protection. Wood chips and shavings are crushed in the production of MDF or insulation boards and are carefully ground to a precisely defined fibre length because this influences the product quality, e.g. the elasticity and the thermal conductivity of the insulation material. Other influencing factors include the slenderness ratio (ratio of fibre length to fibre thickness) and the dust content, which in turn determine the strength of the boards and their flexural strength.

The fibre quality must be assessed before further processing in order to ensure the quality of MDF manufacturing. Dynamic image analysis with QICPIC and the FIBROS disperser, which was specially developed for fibres, are ideally suited for dispersing wood fibres within a few minutes and analysing each fibre individually with regard to length and thickness. The results can be represented as size distributions of the length or thickness of the fibres and as shape distributions, for example in terms of elongation (ratio of fibre width to fibre length). A particle gallery also provides qualitative information about the shape of the fibres.

Repeatable measuring results for fibre length and fibre width

Wood fibre length

Fibre length distribution in Q1 representation with fibre lengths of around 100 microns to 25,000 microns for an x50 value of around 2,500 microns | Measurement of three samples with good reproducibility

Wood fibre difi

Q1 distribution of the fibre thickness with diameters of around 10 microns to 500 microns for an x50 value of around 50 microns | Measurement of three samples with good reproducibility

Distribution of the elongation shape parameter

Elongation, in particular, is a useful descriptive shape parameter for fibres that illustrates the ratio of fibre thickness to fibre length and can assume values between 0 and 1. High values close to 1 indicate compact fibres and low values near to 0 indicate long fibres.

  • Fast, repeatable and reproducible analysis of fibre length
  • Direct calculation of fibre length
  • Sample dispersion adjusted to production process | wet or dry
  • Results independent of raw material

Particle Gallery

Download application notes for detailed information

Please enter the email address by which you registered your user account. Then press "Send password" and your password will immediately be emailed to you. Make sure to spell your email address correctly.

Return to login form 

Are you interested in additional content? Please register an account. After confirming the registration link brochures, application notes and other documents on particle measurement will be available for download.

Application strengths

  • Reproducible results within a short time
  • Low sample preparation effort
  • Optimum dispersion, also intertwined fibres
  • High statistical reliability
  • Very good repeatability | comparability
  • No influence by the operator
  • Can be adapted for various fibre collections with different screening inserts and cards

Customer benefits

  • Time savings compared to previous microscopic measurement with manual dispersion
  • No user-dependent results
  • High statistical significance due to several thousand individual fibres per analysis
  • Less faulty production
  • Disperse particle systems with desired, controlled properties

Typical configuration



Image Analysis | Dry
Fibre diameter: 5 µm - 5,000 µm
Fibre length: 500 µm - 30,000 µm
Sample amount: 0.5 g - 20 g

Suited for

Typical applications

Applied for control of