Particle size analysis for suspensions and emulsions from 0.25 µm to 3,500 µm with small amounts of precious or active substances
With the long optical bench, the HELOS/KR laser diffraction sensor covers a particularly wide particle range. In combination with the stationary CUVETTE 50 it demonstrates its full strengths in wet measurements of small amounts of finely to coarsely dispersed samples with particle sizes in the range from 0.25 µm to 3,500 µm. Typical applications involve substances that are very complex to manufacture and are therefore valuable and hence only available in small quantities. Due to their active or toxic properties, special sample handling is often required, and measurements need to be managed with very low particle concentrations.
The geometry of the 50 ml stationary cuvette produces a long optical path for the laser beam (over 20 mm) in the sample liquid, thereby enabling the optimum concentration for reliable measurements – even with low sample concentrations. An integrated ultrasonic finger made of titanium can be manually lowered into the cuvette as required. The energy input for dispersion can be precisely controlled from 0 to 60 W by the software. The necessary homogenisation of the sample during the measurement is achieved with the aid of a PTFE-coated magnetic stirrer with adjustable speed.
The cuvette consists of high-grade optical glass and all joints are sintered, so it is extremely chemically resistant and suitable for most dispersing liquids. Potential contamination of the sample is effectively prevented, as a result of which complete recovery and reuse of the sample in its original state is possible even after the measurement. The stationary cuvette also promotes simple and safe filling and makes cleaning effortless.
- Particle size and particle size distribution
- For analyses in the laboratory
- For suspensions and emulsions | Precious, active substances
- 50 ml analysis volume | For small sample amounts
- 6 high-resolution measuring ranges from 0.25 µm to 3,500 µm | R2 to R7T
- Cuvette made of sintered glass | No contamination of the sample
- Integrated titanium ultrasonic finger | Energy input 0 to 60 W
- PTFE-coated magnetic stirrer