HELOS/KF & SPRAYER using ROTOR/M for spray operation under angles from 0° to 90° in steps of 5°
All HELOS systems are designed to operate in any orientation, i.e. upside down or vertical along a wall. This enables the SPRAYER to operate in non-horizontal conditions, simulating different spraying directions, e.g. for the application of nasal sprays.
ROTOR/M connected to HELOS/BF or HELOS/KF automatically lifts the complete unit and turns it to the desired angle.
|
Laser Diffraction Sensors |
| Overview |
| HELOS |
 |
|
Dispersing Units |
| OASIS |
| RODOS |
| RODOS/M |
| GRADIS |
| SUCELL |
| QUIXEL |
| CUVETTE |
| SPRAYER |
| INHALER |
|
Software |
| WINDOX 5 |
|
Accessories |
| Computer |
| VIBRI family |
| ASPIROS |
| Extraction Units |
| SVA |
| ROTOR/M |
|
Information |
| Publications |
The control panel in the left foot of ROTOR/M allows for manual operation, i.e. start, stop of the lifting process.
Two synchronized stepper motors and a spindle drive unit perform the lift from 0 to 650mm easily.
Manual tilt function from 0° to 90° in steps of 5°.
Built-in safety functions as 0° and 90° detection.
HELOS/BF mounted on the ROTOR/M with the SPRAYER installed. A nasal spray bottle is e.g. activated by the actuator at preset constant force.
Click for larger image.